Gitlab -git的身份验证失败太多

imzjd6km  于 2023-02-28  发布在  Git
关注(0)|答案(7)|浏览(412)

我的命令行git从上周开始就不能用了，我只记得我在git version controlled中初始化了一个本地文件夹，并添加了一个远程git ref，然后我的git就不能推拉了，它显示：

git clone git@gitlab.xxx.com:xxx/myproj.git myproj
Cloning into 'myproj'...
Received disconnect from 192.168.xxx.xxx: 2: Too many authentication failures for git
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

奇怪的是，我的版本控制在JetBrain的想法工作正常，它仍然可以拉或推的项目，不能拉在命令行。
我之前在gitlab中添加了id_rsa.pub，现在我重新添加了一次，但是它不起作用。
我的ssh调试信息
ssh -vgit@gitlab.xxx.com

OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: Connecting to gitlab.xxx.com [192.168.xxx.xxx] port 22.
debug1: Connection established.
debug1: identity file /Users/abc/.ssh/id_rsa type -1
debug1: identity file /Users/abc/.ssh/id_rsa-cert type -1
debug1: identity file /Users/abc/.ssh/id_dsa type -1
debug1: identity file /Users/abc/.ssh/id_dsa-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3
debug1: match: OpenSSH_5.3 pat OpenSSH_5*
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA d7:11:d8:62:a6:30:1d:4a:c7:f1:99:bd:ba:54:de:60
debug1: Host 'gitlab.corp.com' is known and matches the RSA host key.
debug1: Found key in /Users/abc/.ssh/known_hosts:127
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey,password,hostbased
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /Users/abc/.ssh/id_rsa.cn0
debug1: Authentications that can continue: publickey,password,hostbased
debug1: Offering RSA public key: /Users/abc/.ssh/id_rsa.cn6
debug1: Authentications that can continue: publickey,password,hostbased
debug1: Offering RSA public key: /Users/abc/.ssh/id_rsa.cn1
debug1: Authentications that can continue: publickey,password,hostbased
debug1: Offering RSA public key: /Users/abc/.ssh/id_rsa.cn2
debug1: Authentications that can continue: publickey,password,hostbased
debug1: Offering RSA public key: /Users/abc/.ssh/id_rsa.cn5
debug1: Authentications that can continue: publickey,password,hostbased
debug1: Offering RSA public key: /Users/abc/.ssh/id_rsa.cn8
Received disconnect from 192.168.100.218: 2: Too many authentication failures for git
abc@LiuzhMacbook:~/.ssh$
abc@LiuzhMacbook:~/.ssh$ ls
authorized_keys  id_rsa           known_hosts      tmp/
abc@LiuzhMacbook:~/.ssh$ rm known_hosts
abc@LiuzhMacbook:~/.ssh$ ssh -v git@gitlab.corp.com
OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: Connecting to gitlab.corp.com [192.168.100.218] port 22.
debug1: Connection established.
debug1: identity file /Users/abc/.ssh/id_rsa type -1
debug1: identity file /Users/abc/.ssh/id_rsa-cert type -1
debug1: identity file /Users/abc/.ssh/id_dsa type -1
debug1: identity file /Users/abc/.ssh/id_dsa-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3
debug1: match: OpenSSH_5.3 pat OpenSSH_5*
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA d7:11:d8:62:a6:30:1d:4a:c7:f1:99:bd:ba:54:de:60
The authenticity of host 'gitlab.corp.com (192.168.100.218)' can't be established.
RSA key fingerprint is d7:11:d8:62:a6:30:1d:4a:c7:f1:99:bd:ba:54:de:60.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'gitlab.corp.com,192.168.100.218' (RSA) to the list of known hosts.
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey,password,hostbased
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /Users/abc/.ssh/id_rsa.cn0
debug1: Authentications that can continue: publickey,password,hostbased
debug1: Offering RSA public key: /Users/abc/.ssh/id_rsa.cn6
debug1: Authentications that can continue: publickey,password,hostbased
debug1: Offering RSA public key: /Users/abc/.ssh/id_rsa.cn1
debug1: Authentications that can continue: publickey,password,hostbased
debug1: Offering RSA public key: /Users/abc/.ssh/id_rsa.cn2
debug1: Authentications that can continue: publickey,password,hostbased
debug1: Offering RSA public key: /Users/abc/.ssh/id_rsa.cn5
debug1: Authentications that can continue: publickey,password,hostbased
debug1: Offering RSA public key: /Users/abc/.ssh/id_rsa.cn8
Received disconnect from 192.168.100.218: 2: Too many authentication failures for git
Git

7条答案

按热度按时间
wlp8pajw

wlp8pajw1#

在SourceTree中，尝试将SSH Client从PuTTY/Plink更改为Open SSH。

赞(0）分享  回复(0）举报  2023-02-28
66bbxpm5

66bbxpm52#

您可以使用不同的ssh url来引用您想要的正确的公钥/私钥。
在HOME/.ssh中添加一个名为config的文件：

Host            mygitlab
Hostname        gitlab.xxx.com
User            git
IdentityFile    ~/.ssh/id_rsa.gitlab
IdentitiesOnly yes

并更改您的网址：

git clone mygitlab:xxx/myproj.git myproj

这样，您就避免了默认的ssh行为，即为ssh提供要尝试的每个键。

赞(0）分享  回复(0）举报  2023-02-28
7d7tgy0s

7d7tgy0s3#

首先设置你的ssh键。
如果密钥设置正确-尝试重新启动ssh-agent

eval $(ssh-agent)

您应该看到进程的PID，并且您的r键将加载。
要手动添加密钥，请用途：ssh-add。这将从默认的.ssh文件夹加载密钥

赞(0）分享  回复(0）举报  2023-02-28
xe55xuns

xe55xuns4#

在Linux上运行
下面的代码对我很有效（我使用gitlab）：

eval $(ssh-agent -s)
  ssh-add ~/.ssh/<ssh_directory>
  ssh -T git@gitlab.com

并且在一个命令中：

eval $(ssh-agent -s) &&  ssh-add ~/.ssh/gitlab &&   ssh -T git@gitlab.com
赞(0）分享  回复(0）举报  2023-02-28
xqkwcwgp

xqkwcwgp5#

最后-主机的原始重启工作，但想知道真正发生了什么...

赞(0）分享  回复(0）举报  2023-02-28
mznpcxlj

mznpcxlj6#

对我来说，问题是我在.ssh文件夹中有很多旧密钥。所以，只要删除它们，一切都能正常工作。

赞(0）分享  回复(0）举报  2023-02-28
btxsgosb

btxsgosb7#

这可能是ssh连接问题
在本地删除私钥时
您没有删除其身份指纹
使用此命令 checkout

ssh-add -l

寻求更多帮助

ssh-add -h

使用该命令可以删除所有标识

ssh-add -D
赞(0）分享  回复(0）举报  2023-02-28
我来回答

相关问题

    查看更多

    热门标签

    更多
    JavaquerypythonNode开发语言requestUtil数据库Table后端算法LoggerMessageElementParser

    最新问答

    更多
    • 蜀ICP备13028337号-1 大数据知识库 https://www.saoniuhuo.com © All rights reserved
    • 本站内容来源互联网,如果侵犯您的权益请联系我们删除, 联系方式：448109455@qq.com