Python 3.8 + Apache 2.4 + mod_wsgi来运行django站点

plupiseo  于 2023-06-24  发布在  Apache
关注(0)|答案(1)|浏览(157)

所以我已经没有什么可以检查的了，我已经确保我的Python以及Apache都是64位，python是全系统安装的，我之前已经卸载了32位版本，重新安装了mod_wsgi以获取64位模块文件，为了防止我使用了错误的构建工具，我甚至尝试了预编译的mod_wsgi-4.7.1+ap24vc15-cp38-cp38-win_amd64.whl，但我确实使用了正确的构建工具，我一直得到一个错误：

  1. c:/users/eryk/pycharmprojects/django blog/venv/lib/site-packages/mod_wsgi/server/mod_wsgi.cp38-win_amd64.pyd into server: The specified module could not be found.

文件就在那里，这些是mod_wsgi-express module-config生成的配置的参数：

  1. LoadModule wsgi_module "c:/users/eryk/pycharmprojects/django blog/venv/lib/site-packages/mod_wsgi/server/mod_wsgi.cp38-win_amd64.pyd"
  2. WSGIPythonHome "c:/users/eryk/pycharmprojects/django blog/venv"

这是我的httpd.conf，如果有人想知道我禁用了SSL，因为我得到了一个错误，说443被占用，将排除故障，一旦我可以真正启动Apache服务，因为这是越来越愚蠢，任何人都知道问题可能是什么？会非常感激的。CTRL + F“python”将在apache配置中找到python编辑

  1. # Apache Hause .conf file for TLS/1.3 supported versions
  2. #
  3. # This is the main Apache HTTP server configuration file.  It contains the
  4. # configuration directives that give the server its instructions.
  5. # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
  6. # In particular, see 
  7. # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
  8. # for a discussion of each configuration directive.
  9. #
  10. # Do NOT simply read the instructions in here without understanding
  11. # what they do.  They're here only as hints or reminders.  If you are unsure
  12. # consult the online docs. You have been warned.  
  13. #
  14. # Configuration and logfile names: If the filenames you specify for many
  15. # of the server's control files begin with "/" (or "drive:/" for Win32), the
  16. # server will use that explicit path.  If the filenames do *not* begin
  17. # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
  18. # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
  19. # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
  20. # will be interpreted as '/logs/access_log'.
  21. #
  22. # NOTE: Where filenames are specified, you must use forward slashes
  23. # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
  24. # If a drive letter is omitted, the drive on which httpd.exe is located
  25. # will be used by default.  It is recommended that you always supply
  26. # an explicit drive letter in absolute paths to avoid confusion.
  28. #
  29. # ServerRoot: The top of the directory tree under which the server's
  30. # configuration, error, and log files are kept.
  31. #
  32. # Do not add a slash at the end of the directory path.  If you point
  33. # ServerRoot at a non-local disk, be sure to specify a local disk on the
  34. # Mutex directive, if file-based mutexes are used.  If you wish to share the
  35. # same ServerRoot for multiple httpd daemons, you will need to change at
  36. # least PidFile.
  37. #
  39. Define SRVROOT "/Apache24"
  40. ServerRoot "${SRVROOT}"
  42. #
  43. # Uncomment below line to enable TLS/1.3 in server.
  44. # (Requires OpenSSL 1.1.1 and up)
  46. Define ENABLE_TLS13 "Yes"
  48. #
  49. # Mutex: Allows you to set the mutex mechanism and mutex file directory
  50. # for individual mutexes, or change the global defaults
  51. #
  52. # Uncomment and change the directory if mutexes are file-based and the default
  53. # mutex file directory is not on a local disk or is not appropriate for some
  54. # other reason.
  55. #
  56. # Mutex default:logs
  58. #
  59. # Listen: Allows you to bind Apache to specific IP addresses and/or
  60. # ports, instead of the default. See also the <VirtualHost>
  61. # directive.
  62. #
  63. # Change this to Listen on specific IP addresses as shown below to 
  64. # prevent Apache from glomming onto all bound IP addresses.
  65. #
  66. #Listen 12.34.56.78:80
  67. Listen 8080
  69. #
  70. # Dynamic Shared Object (DSO) Support
  71. #
  72. # To be able to use the functionality of a module which was built as a DSO you
  73. # have to place corresponding `LoadModule' lines at this location so the
  74. # directives contained in it are actually available _before_ they are used.
  75. # Statically compiled modules (those listed by `httpd -l') do not need
  76. # to be loaded here.
  77. #
  78. # Example:
  79. # LoadModule foo_module modules/mod_foo.so
  80. #
  81. #LoadModule access_compat_module modules/mod_access_compat.so
  82. LoadModule actions_module modules/mod_actions.so
  83. LoadModule alias_module modules/mod_alias.so
  84. LoadModule allowmethods_module modules/mod_allowmethods.so
  85. LoadModule asis_module modules/mod_asis.so
  86. LoadModule auth_basic_module modules/mod_auth_basic.so
  87. #LoadModule auth_digest_module modules/mod_auth_digest.so
  88. #LoadModule auth_form_module modules/mod_auth_form.so
  89. #LoadModule authn_anon_module modules/mod_authn_anon.so
  90. LoadModule authn_core_module modules/mod_authn_core.so
  91. #LoadModule authn_dbd_module modules/mod_authn_dbd.so
  92. #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  93. LoadModule authn_file_module modules/mod_authn_file.so
  94. #LoadModule authn_socache_module modules/mod_authn_socache.so
  95. #LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
  96. #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  97. LoadModule authz_core_module modules/mod_authz_core.so
  98. #LoadModule authz_dbd_module modules/mod_authz_dbd.so
  99. #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  100. LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
  101. LoadModule authz_host_module modules/mod_authz_host.so
  102. #LoadModule authz_owner_module modules/mod_authz_owner.so
  103. LoadModule authz_user_module modules/mod_authz_user.so
  104. LoadModule autoindex_module modules/mod_autoindex.so
  105. #LoadModule buffer_module modules/mod_buffer.so
  106. #LoadModule cache_module modules/mod_cache.so
  107. #LoadModule cache_disk_module modules/mod_cache_disk.so
  108. #LoadModule cache_socache_module modules/mod_cache_socache.so
  109. #LoadModule cern_meta_module modules/mod_cern_meta.so
  110. LoadModule cgi_module modules/mod_cgi.so
  111. #LoadModule charset_lite_module modules/mod_charset_lite.so
  112. #LoadModule data_module modules/mod_data.so
  113. #LoadModule dav_module modules/mod_dav.so
  114. #LoadModule dav_fs_module modules/mod_dav_fs.so
  115. #LoadModule dav_lock_module modules/mod_dav_lock.so
  116. #LoadModule dbd_module modules/mod_dbd.so
  117. #LoadModule deflate_module modules/mod_deflate.so
  118. LoadModule dir_module modules/mod_dir.so
  119. #LoadModule dumpio_module modules/mod_dumpio.so
  120. LoadModule env_module modules/mod_env.so
  121. #LoadModule expires_module modules/mod_expires.so
  122. #LoadModule ext_filter_module modules/mod_ext_filter.so
  123. #LoadModule file_cache_module modules/mod_file_cache.so
  124. #LoadModule filter_module modules/mod_filter.so
  125. #LoadModule headers_module modules/mod_headers.so
  126. #LoadModule heartbeat_module modules/mod_heartbeat.so
  127. #LoadModule heartmonitor_module modules/mod_heartmonitor.so
  128. #LoadModule http2_module modules/mod_http2.so
  129. #LoadModule ident_module modules/mod_ident.so
  130. #LoadModule imagemap_module modules/mod_imagemap.so
  131. LoadModule include_module modules/mod_include.so
  132. LoadModule info_module modules/mod_info.so
  133. LoadModule isapi_module modules/mod_isapi.so
  134. #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
  135. #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
  136. #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
  137. #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
  138. #LoadModule ldap_module modules/mod_ldap.so
  139. #LoadModule logio_module modules/mod_logio.so
  140. LoadModule log_config_module modules/mod_log_config.so
  141. #LoadModule log_debug_module modules/mod_log_debug.so
  142. #LoadModule log_forensic_module modules/mod_log_forensic.so
  143. #LoadModule lua_module modules/mod_lua.so
  144. #LoadModule macro_module modules/mod_macro.so
  145. #LoadModule md_module modules/mod_md.so
  146. LoadModule mime_module modules/mod_mime.so
  147. #LoadModule mime_magic_module modules/mod_mime_magic.so
  148. LoadModule negotiation_module modules/mod_negotiation.so
  149. #LoadModule proxy_module modules/mod_proxy.so
  150. #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  151. #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
  152. #LoadModule proxy_connect_module modules/mod_proxy_connect.so
  153. #LoadModule proxy_express_module modules/mod_proxy_express.so
  154. #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
  155. #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
  156. #LoadModule proxy_html_module modules/mod_proxy_html.so
  157. #LoadModule proxy_http_module modules/mod_proxy_http.so
  158. #LoadModule proxy_http2_module modules/mod_proxy_http2.so
  159. #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
  160. #LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so
  161. #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
  162. #LoadModule ratelimit_module modules/mod_ratelimit.so
  163. #LoadModule reflector_module modules/mod_reflector.so
  164. #LoadModule remoteip_module modules/mod_remoteip.so
  165. #LoadModule request_module modules/mod_request.so
  166. #LoadModule reqtimeout_module modules/mod_reqtimeout.so
  167. #LoadModule rewrite_module modules/mod_rewrite.so
  168. #LoadModule sed_module modules/mod_sed.so
  169. #LoadModule session_module modules/mod_session.so
  170. #LoadModule session_cookie_module modules/mod_session_cookie.so
  171. #LoadModule session_crypto_module modules/mod_session_crypto.so
  172. #LoadModule session_dbd_module modules/mod_session_dbd.so
  173. LoadModule setenvif_module modules/mod_setenvif.so
  174. #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
  175. #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
  176. #LoadModule socache_dbm_module modules/mod_socache_dbm.so
  177. #LoadModule socache_memcache_module modules/mod_socache_memcache.so
  178. #LoadModule socache_redis_module modules/mod_socache_redis.so
  179. LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
  180. #LoadModule speling_module modules/mod_speling.so
  181. LoadModule ssl_module modules/mod_ssl.so
  182. LoadModule status_module modules/mod_status.so
  183. #LoadModule substitute_module modules/mod_substitute.so
  184. #LoadModule unique_id_module modules/mod_unique_id.so
  185. #LoadModule userdir_module modules/mod_userdir.so
  186. #LoadModule usertrack_module modules/mod_usertrack.so
  187. #LoadModule version_module modules/mod_version.so
  188. #LoadModule vhost_alias_module modules/mod_vhost_alias.so
  189. #LoadModule watchdog_module modules/mod_watchdog.so
  190. #LoadModule xml2enc_module modules/mod_xml2enc.so
  192. <IfModule unixd_module>
  193. #
  194. # If you wish httpd to run as a different user or group, you must run
  195. # httpd as root initially and it will switch.  
  196. #
  197. # User/Group: The name (or #number) of the user/group to run httpd as.
  198. # It is usually good practice to create a dedicated user and group for
  199. # running httpd, as with most system services.
  200. #
  201. User daemon
  202. Group daemon
  204. </IfModule>
  206. # 'Main' server configuration
  207. #
  208. # The directives in this section set up the values used by the 'main'
  209. # server, which responds to any requests that aren't handled by a
  210. # <VirtualHost> definition.  These values also provide defaults for
  211. # any <VirtualHost> containers you may define later in the file.
  212. #
  213. # All of these directives may appear inside <VirtualHost> containers,
  214. # in which case these default settings will be overridden for the
  215. # virtual host being defined.
  216. #
  218. #
  219. # ServerAdmin: Your address, where problems with the server should be
  220. # e-mailed.  This address appears on some server-generated pages, such
  221. # as error documents.  e.g. admin@your-domain.com
  222. #
  223. ServerAdmin admin@example.com
  225. #
  226. # ServerName gives the name and port that the server uses to identify itself.
  227. # This can often be determined automatically, but we recommend you specify
  228. # it explicitly to prevent problems during startup.
  229. #
  230. # If your host doesn't have a registered DNS name, enter its IP address here.
  231. #
  232. ServerName localhost
  234. #
  235. # Deny access to the entirety of your server's filesystem. You must
  236. # explicitly permit access to web content directories in other 
  237. # <Directory> blocks below.
  238. #
  239. <Directory />
  240.     AllowOverride none
  241.     Require all denied
  242. </Directory>
  244. #
  245. # Note that from this point forward you must specifically allow
  246. # particular features to be enabled - so if something's not working as
  247. # you might expect, make sure that you have specifically enabled it
  248. # below.
  249. #
  251. #
  252. # DocumentRoot: The directory out of which you will serve your
  253. # documents. By default, all requests are taken from this directory, but
  254. # symbolic links and aliases may be used to point to other locations.
  255. #
  257. ## PYTHON EDIT START
  258. LoadModule wsgi_module "c:/users/eryk/pycharmprojects/django blog/venv/lib/site-packages/mod_wsgi/server/mod_wsgi.cp38-win_amd64.pyd"
  259. #WSGIScriptAlias / C:/Users/Eryk/PycharmProjects/Django Blog/django_blog/django_blog/wsgi.py
  260. WSGIPythonHome "c:/users/eryk/pycharmprojects/django blog/venv"
  261. WSGIPythonPath "C:/Users/Eryk/PycharmProjects/Django Blog/django_blog"
  262. ## PYTHON EDIT END
  264. DocumentRoot "${SRVROOT}/htdocs"
  265. ## <Directory "${SRVROOT}/htdocs"> PYTHON EDIT START <-
  266. <Directory /path/to/mysite.com/mysite>
  267. <Files wsgi.py>
  268. Require all granted
  269. </Files>
  270. </Directory>
  271.     #
  272.     # Possible values for the Options directive are "None", "All",
  273.     # or any combination of:
  274.     #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  275.     #
  276.     # Note that "MultiViews" must be named *explicitly* --- "Options All"
  277.     # doesn't give it to you.
  278.     #
  279.     # The Options directive is both complicated and important.  Please see
  280.     # http://httpd.apache.org/docs/2.4/mod/core.html#options
  281.     # for more information.
  282.     #
  283. ##    Options Indexes FollowSymLinks
  285.     #
  286.     # AllowOverride controls what directives may be placed in .htaccess files.
  287.     # It can be "All", "None", or any combination of the keywords:
  288.     #   Options FileInfo AuthConfig Limit
  289.     #
  290. ##    AllowOverride None
  292.     #
  293.     # Controls who can get stuff from this server.
  294.     #
  295. ##    Require all granted
  296. ## </Directory> ##PYTHON EDIT END
  298. #
  299. # DirectoryIndex: sets the file that Apache will serve if a directory
  300. # is requested.
  301. #
  302. <IfModule dir_module>
  303.     DirectoryIndex index.html
  304. </IfModule>
  306. #
  307. # The following lines prevent .htaccess and .htpasswd files from being 
  308. # viewed by Web clients. 
  309. #
  310. <Files ".ht*">
  311.     Require all denied
  312. </Files>
  314. #
  315. # ErrorLog: The location of the error log file.
  316. # If you do not specify an ErrorLog directive within a <VirtualHost>
  317. # container, error messages relating to that virtual host will be
  318. # logged here.  If you *do* define an error logfile for a <VirtualHost>
  319. # container, that host's errors will be logged there and not here.
  320. #
  321. ErrorLog "logs/error.log"
  323. #
  324. # LogLevel: Control the number of messages logged to the error_log.
  325. # Possible values include: debug, info, notice, warn, error, crit,
  326. # alert, emerg.
  327. #
  328. LogLevel warn
  330. <IfModule log_config_module>
  331.     #
  332.     # The following directives define some format nicknames for use with
  333.     # a CustomLog directive (see below).
  334.     #
  335.     LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
  336.     LogFormat "%h %l %u %t \"%r\" %>s %b" common
  338.     <IfModule logio_module>
  339.       # You need to enable mod_logio.c to use %I and %O
  340.       LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
  341.     </IfModule>
  343.     #
  344.     # The location and format of the access logfile (Common Logfile Format).
  345.     # If you do not define any access logfiles within a <VirtualHost>
  346.     # container, they will be logged here.  Contrariwise, if you *do*
  347.     # define per-<VirtualHost> access logfiles, transactions will be
  348.     # logged therein and *not* in this file.
  349.     #
  350.     CustomLog "logs/access.log" common
  352.     #
  353.     # If you prefer a logfile with access, agent, and referer information
  354.     # (Combined Logfile Format) you can use the following directive.
  355.     #
  356.     #CustomLog "logs/access.log" combined
  357. </IfModule>
  359. <IfModule alias_module>
  360.     #
  361.     # Redirect: Allows you to tell clients about documents that used to 
  362.     # exist in your server's namespace, but do not anymore. The client 
  363.     # will make a new request for the document at its new location.
  364.     # Example:
  365.     # Redirect permanent /foo http://www.example.com/bar
  367.     #
  368.     # Alias: Maps web paths into filesystem paths and is used to
  369.     # access content that does not live under the DocumentRoot.
  370.     # Example:
  371.     # Alias /webpath /full/filesystem/path
  372.     #
  373.     # If you include a trailing / on /webpath then the server will
  374.     # require it to be present in the URL.  You will also likely
  375.     # need to provide a <Directory> section to allow access to
  376.     # the filesystem path.
  378.     #
  379.     # ScriptAlias: This controls which directories contain server scripts. 
  380.     # ScriptAliases are essentially the same as Aliases, except that
  381.     # documents in the target directory are treated as applications and
  382.     # run by the server when requested rather than as documents sent to the
  383.     # client.  The same rules about trailing "/" apply to ScriptAlias
  384.     # directives as to Alias.
  385.     #
  386.     ScriptAlias /cgi-bin/ "${SRVROOT}/cgi-bin/"
  388. </IfModule>
  390. <IfModule cgid_module>
  391.     #
  392.     # ScriptSock: On threaded servers, designate the path to the UNIX
  393.     # socket used to communicate with the CGI daemon of mod_cgid.
  394.     #
  395.     #Scriptsock logs/cgisock
  396. </IfModule>
  398. #
  399. # "${SRVROOT}/cgi-bin" should be changed to whatever your ScriptAliased
  400. # CGI directory exists, if you have that configured.
  401. #
  402. <Directory "${SRVROOT}/cgi-bin">
  403.     AllowOverride None
  404.     Options None
  405.     Require all granted
  406. </Directory>
  408. <IfModule mime_module>
  409.     #
  410.     # TypesConfig points to the file containing the list of mappings from
  411.     # filename extension to MIME-type.
  412.     #
  413.     TypesConfig conf/mime.types
  415.     #
  416.     # AddType allows you to add to or override the MIME configuration
  417.     # file specified in TypesConfig for specific file types.
  418.     #
  419.     #AddType application/x-gzip .tgz
  420.     #
  421.     # AddEncoding allows you to have certain browsers uncompress
  422.     # information on the fly. Note: Not all browsers support this.
  423.     #
  424.     #AddEncoding x-compress .Z
  425.     #AddEncoding x-gzip .gz .tgz
  426.     #
  427.     # If the AddEncoding directives above are commented-out, then you
  428.     # probably should define those extensions to indicate media types:
  429.     #
  430.     AddType application/x-compress .Z
  431.     AddType application/x-gzip .gz .tgz
  433.     #
  434.     # AddHandler allows you to map certain file extensions to "handlers":
  435.     # actions unrelated to filetype. These can be either built into the server
  436.     # or added with the Action directive (see below)
  437.     #
  438.     # To use CGI scripts outside of ScriptAliased directories:
  439.     # (You will also need to add "ExecCGI" to the "Options" directive.)
  440.     #
  441.     #AddHandler cgi-script .cgi .pl
  443.     # For type maps (negotiated resources):
  444.     #AddHandler type-map var
  446.     #
  447.     # Filters allow you to process content before it is sent to the client.
  448.     #
  449.     # To parse .shtml files for server-side includes (SSI):
  450.     # (You will also need to add "Includes" to the "Options" directive.)
  451.     #
  452.     #AddType text/html .shtml
  453.     #AddOutputFilter INCLUDES .shtml
  454. </IfModule>
  456. #
  457. # The mod_mime_magic module allows the server to use various hints from the
  458. # contents of the file itself to determine its type.  The MIMEMagicFile
  459. # directive tells the module where the hint definitions are located.
  460. #
  461. #MIMEMagicFile conf/magic
  463. #
  464. # Customizable error responses come in three flavors:
  465. # 1) plain text 2) local redirects 3) external redirects
  466. #
  467. # Some examples:
  468. #ErrorDocument 500 "The server made a boo boo."
  469. #ErrorDocument 404 /missing.html
  470. #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
  471. #ErrorDocument 402 http://www.example.com/subscription_info.html
  472. #
  474. #
  475. # MaxRanges: Maximum number of Ranges in a request before
  476. # returning the entire resource, or one of the special
  477. # values 'default', 'none' or 'unlimited'.
  478. # Default setting is to accept 200 Ranges.
  479. #MaxRanges unlimited
  481. #
  482. # EnableMMAP and EnableSendfile: On systems that support it, 
  483. # memory-mapping or the sendfile syscall may be used to deliver
  484. # files.  This usually improves server performance, but must
  485. # be turned off when serving from networked-mounted 
  486. # filesystems or if support for these functions is otherwise
  487. # broken on your system.
  488. # Defaults: EnableMMAP On, EnableSendfile Off
  489. #
  490. #EnableMMAP off
  491. #EnableSendfile on
  493. #AcceptFilter http none
  494. #AcceptFilter https none
  496. # Supplemental configuration
  497. #
  498. # The configuration files in the conf/extra/ directory can be 
  499. # included to add extra features or to modify the default configuration of 
  500. # the server, or you may simply copy their contents here and change as 
  501. # necessary.
  503. # Server-pool management (MPM specific)
  504. #Include conf/extra/httpd-mpm.conf
  506. # Multi-language error messages
  507. #Include conf/extra/httpd-multilang-errordoc.conf
  509. # Fancy directory listings
  510. Include conf/extra/httpd-autoindex.conf
  512. # Language settings
  513. #Include conf/extra/httpd-languages.conf
  515. # User home directories
  516. #Include conf/extra/httpd-userdir.conf
  518. # Real-time info on requests and configuration
  519. Include conf/extra/httpd-info.conf
  521. # Virtual hosts
  522. # Include conf/extra/httpd-vhosts.conf
  524. # Local access to the Apache HTTP Server Manual
  525. #Include conf/extra/httpd-manual.conf
  527. # Distributed authoring and versioning (WebDAV)
  528. #Include conf/extra/httpd-dav.conf
  530. # Various default settings
  531. #Include conf/extra/httpd-default.conf
  533. # Configure mod_proxy_html to understand HTML4/XHTML1
  534. <IfModule proxy_html_module>
  535. Include conf/extra/httpd-proxy-html.conf
  536. </IfModule>
  538. # Secure (SSL/TLS) connections
  539. # Note: The following must must be present to support
  540. #       starting without SSL on platforms with no /dev/random equivalent
  541. #       but a statically compiled-in mod_ssl.
  542. #
  543. <IfModule ssl_module>
  544. #Include conf/extra/httpd-ssl.conf
  545. ##Include conf/extra/httpd-ahssl.conf ## DISABLED FOR ERROR
  546. SSLRandomSeed startup builtin
  547. SSLRandomSeed connect builtin
  548. </IfModule>
  549. <IfModule http2_module>
  550.     ProtocolsHonorOrder On
  551.     Protocols h2 h2c http/1.1
  552. </IfModule>
apache

1条答案

按热度按时间
7uzetpgm

7uzetpgm1#

我最好的猜测是Apache可能没有访问该文件的权限。
mod_wsgi的创建者实际上用相同的错误（“Cannot load X into server：无法找到指定的模块”）here：
确保以下事项：
1.您没有隐藏扩展名，并且添加了两次扩展名。
1.文件对于任何Apache服务用户都是可读的。
1.您的Apache [安装]是[与您的Python安装相同的架构（32或64位）]。
1.你的Python是为所有用户安装的，而不仅仅是你安装它的用户。

赞(0）分享  回复(0）举报  2023-06-24
我来回答

相关问题

    查看更多

    热门标签

    更多
    JavaquerypythonNode开发语言requestUtil数据库Table后端算法LoggerMessageElementParser

    最新问答

    更多
    • 蜀ICP备13028337号-1 大数据知识库 https://www.saoniuhuo.com © All rights reserved
    • 本站内容来源互联网,如果侵犯您的权益请联系我们删除, 联系方式：448109455@qq.com