com.zsmartsystems.zigbee.ZigBeeApsFrame类的使用及代码示例

x33g5p2x  于2022-02-05 转载在 其他  
字(13.2k)|赞(0)|评价(0)|浏览(184)

本文整理了Java中com.zsmartsystems.zigbee.ZigBeeApsFrame类的一些代码示例，展示了ZigBeeApsFrame类的具体用法。这些代码示例主要来源于Github/Stackoverflow/Maven等平台，是从一些精选项目中提取出来的代码，具有较强的参考意义，能在一定程度帮忙到你。ZigBeeApsFrame类的具体详情如下：
包路径：com.zsmartsystems.zigbee.ZigBeeApsFrame
类名称：ZigBeeApsFrame

ZigBeeApsFrame介绍

[英]Defines the APS layer frame along with some network layer elements that may be needed by the application.

The APS frame format is composed of an APS header and an APS payload. The fields of the APS header appear in a fixed order, however, the addressing fields may not be included in all frames.

Note that not all APS header fields may be present in this class. The class is passed from the framework to the hardware drivers where it is processed accordingly. Should data be missing that is required by a hardware implemention, it will be added.
[中]定义APS层框架以及应用程序可能需要的一些网络层元素。
APS帧格式由APS报头和APS有效载荷组成。APS报头的字段以固定顺序出现，但是，寻址字段可能不包括在所有帧中。
请注意，并非所有APS标头字段都存在于此类中。该类从框架传递到硬件驱动程序，并在那里进行相应的处理。如果硬件实现所需的数据丢失，将添加该数据。

代码示例

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Override
public void sendCommand(final ZigBeeApsFrame apsFrame) {
  synchronized (networkManager) {
    final short sender;
    if (apsFrame.getProfile() == 0) {
      sender = 0;
    } else {
      sender = (short) getSendingEndpoint(apsFrame.getProfile());
    }
    // TODO: How to differentiate group and device addressing?????
    boolean groupCommand = false;
    if (!groupCommand) {
      networkManager.sendCommand(new AF_DATA_REQUEST(apsFrame.getDestinationAddress(),
          (short) apsFrame.getDestinationEndpoint(), sender, apsFrame.getCluster(),
          apsFrame.getApsCounter(), (byte) 0x30, (byte) apsFrame.getRadius(), apsFrame.getPayload()));
    } else {
      networkManager.sendCommand(new AF_DATA_REQUEST_EXT(apsFrame.getDestinationAddress(), sender,
          apsFrame.getCluster(), apsFrame.getApsCounter(), (byte) (0), (byte) 0, apsFrame.getPayload()));
    }
  }
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

public static ZigBeeApsFrame create(ZToolPacket packet) {
    ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
    apsFrame.setCluster(ZdoCommandType.ACTIVE_ENDPOINTS_RESPONSE.getClusterId());
    apsFrame.setDestinationEndpoint(0);
    apsFrame.setSourceAddress(packet.getPacket()[4] + (packet.getPacket()[5] << 8));
    apsFrame.setSourceEndpoint(0);
    apsFrame.setProfile(0);
    apsFrame.setPayload(Arrays.copyOfRange(packet.getPacket(), 5, packet.getPacket().length - 1));

    return apsFrame;
  }
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Test
public void testReceive() {
  ZToolPacket data = getPacket("FE 15 45 FF 00 00 00 01 80 00 00 00 1B 00 5B 23 EB 09 00 4B 12 00 00 00 00 F6");
  ZigBeeApsFrame apsFrame = ZdoCallbackIncoming.create(data);
  assertEquals(0x8001, apsFrame.getCluster());
  assertEquals(0x0000, apsFrame.getSourceAddress());
  assertEquals(0, apsFrame.getProfile());
  assertEquals(0, apsFrame.getDestinationEndpoint());
  assertTrue(Arrays.equals(getPacketData("1B 00 5B 23 EB 09 00 4B 12 00 00 00 00"), apsFrame.getPayload()));
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
apsFrame.setCluster(command.getClusterId());
apsFrame.setApsCounter(apsCounter.getAndIncrement() & 0xff);
apsFrame.setSecurityEnabled(command.getApsSecurity());
apsFrame.setSourceAddress(localNwkAddress);
apsFrame.setRadius(31);
  apsFrame.setAddressMode(ZigBeeNwkAddressMode.DEVICE);
  apsFrame.setDestinationAddress(((ZigBeeEndpointAddress) command.getDestinationAddress()).getAddress());
  apsFrame.setDestinationEndpoint(((ZigBeeEndpointAddress) command.getDestinationAddress()).getEndpoint());
    apsFrame.setDestinationIeeeAddress(node.getIeeeAddress());
  apsFrame.setAddressMode(ZigBeeNwkAddressMode.GROUP);
  apsFrame.setProfile(0);
  apsFrame.setSourceEndpoint(0);
  apsFrame.setDestinationEndpoint(0);
  command.serialize(fieldSerializer);
  apsFrame.setPayload(fieldSerializer.getPayload());
  apsFrame.setSourceEndpoint(1);
  apsFrame.setProfile(0x104);

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Override
public void sendCommand(final ZigBeeApsFrame apsFrame) {
  ConBeeEnqueueSendDataRequest request = new ConBeeEnqueueSendDataRequest();
  request.setRequestId(apsFrame.getApsCounter());
  request.setClusterId(apsFrame.getCluster());
  switch (apsFrame.getAddressMode()) {
    case DEVICE:
      request.setDestinationAddress(
          new ZigBeeEndpointAddress(apsFrame.getDestinationAddress(), apsFrame.getDestinationEndpoint()));
      request.setDestinationAddressMode(ConBeeAddressMode.NWK);
      if (apsFrame.getDestinationAddress() > 0xfff8) {
        //
        request.setTxOptions(0);
      }
      break;
    case GROUP:
      request.setDestinationAddress(new ZigBeeGroupAddress(apsFrame.getDestinationAddress()));
      request.setDestinationAddressMode(ConBeeAddressMode.GROUP);
      break;
    default:
      break;
  }
  request.setProfileId(apsFrame.getProfile());
  request.setRadius(apsFrame.getRadius());
  request.setSourceEndpoint(apsFrame.getSourceEndpoint());
  // request.setTxOptions(txOptions);
  request.setAdsuData(apsFrame.getPayload());
  conbeeHandler.queueFrame(request);
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

try {
  constructor = deserializerClass.getConstructor(int[].class);
  deserializer = constructor.newInstance(new Object[] { apsFrame.getPayload() });
} catch (NoSuchMethodException | SecurityException | InstantiationException | IllegalAccessException
    | IllegalArgumentException | InvocationTargetException e) {
switch (apsFrame.getProfile()) { // TODO: Use ZigBeeProfileType
  case 0x0000:
    command = receiveZdoCommand(fieldDeserializer, apsFrame);
    break;
  default:
    logger.debug("Received message with unknown profile {}", String.format("%04X", apsFrame.getProfile()));
    break;
command.setSourceAddress(new ZigBeeEndpointAddress(apsFrame.getSourceAddress(), apsFrame.getSourceEndpoint()));
command.setDestinationAddress(
    new ZigBeeEndpointAddress(apsFrame.getDestinationAddress(), apsFrame.getDestinationEndpoint()));
command.setApsSecurity(apsFrame.getSecurityEnabled());

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Test
public void testSendCommandZCL() {
  ZigBeeNetworkManager networkManager = mockZigBeeNetworkManager();
  networkManager.setSerializer(DefaultSerializer.class, DefaultDeserializer.class);
  ZigBeeEndpointAddress deviceAddress = new ZigBeeEndpointAddress(1234, 56);
  OnCommand cmd = new OnCommand();
  cmd.setClusterId(6);
  cmd.setDestinationAddress(deviceAddress);
  boolean error = false;
  networkManager.sendCommand(cmd);
  assertFalse(error);
  assertEquals(1, mockedApsFrameListener.getAllValues().size());
  ZigBeeApsFrame apsFrame = mockedApsFrameListener.getValue();
  assertEquals(ZigBeeNwkAddressMode.DEVICE, apsFrame.getAddressMode());
  assertEquals(1234, apsFrame.getDestinationAddress());
  assertEquals(0, apsFrame.getSourceAddress());
  assertEquals(0x104, apsFrame.getProfile());
  assertEquals(6, apsFrame.getCluster());
  assertEquals(56, apsFrame.getDestinationEndpoint());
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Test
public void testRadius() {
  ZigBeeApsFrame frame = new ZigBeeApsFrame();
  frame.setRadius(4);
  assertEquals(4, frame.getRadius());
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Test
public void testSecurityEnable() {
  ZigBeeApsFrame frame = new ZigBeeApsFrame();
  frame.setSecurityEnabled(true);
  assertTrue(frame.getSecurityEnabled());
  frame.setSecurityEnabled(false);
  assertFalse(frame.getSecurityEnabled());
  System.out.println(frame);
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Test
public void testNonMemberRadius() {
  ZigBeeApsFrame frame = new ZigBeeApsFrame();
  frame.setNonMemberRadius(4);
  assertEquals(4, frame.getNonMemberRadius());
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Test
public void testGroupAddress() {
  ZigBeeApsFrame frame = new ZigBeeApsFrame();
  System.out.println(frame);
  frame.setGroupAddress(1);
  assertEquals(1, frame.getGroupAddress());
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

private ZigBeeCommand receiveZdoCommand(final ZclFieldDeserializer fieldDeserializer,
    final ZigBeeApsFrame apsFrame) {
  ZdoCommandType commandType = ZdoCommandType.getValueById(apsFrame.getCluster());
  if (commandType == null) {
    return null;
  }
  ZigBeeCommand command;
  try {
    Class<? extends ZdoCommand> commandClass = commandType.getCommandClass();
    Constructor<? extends ZdoCommand> constructor;
    constructor = commandClass.getConstructor();
    command = constructor.newInstance();
  } catch (NoSuchMethodException | SecurityException | InstantiationException | IllegalAccessException
      | IllegalArgumentException | InvocationTargetException e) {
    logger.debug("Error instantiating ZDO command", e);
    return null;
  }
  command.deserialize(fieldDeserializer);
  return command;
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Test
public void testToString() {
  ZigBeeApsFrame frame = new ZigBeeApsFrame();
  assertNotNull(frame.toString());
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Test
public void testNodeNetworkAddressUpdate() {
  mockedTransport = Mockito.mock(ZigBeeTransportTransmit.class);
  mockedApsFrameListener = ArgumentCaptor.forClass(ZigBeeApsFrame.class);
  ZigBeeNetworkManager networkManager = new ZigBeeNetworkManager(mockedTransport);
  ZigBeeNode node = new ZigBeeNode(networkManager, new IeeeAddress("12345678990ABCDEF"));
  node.setNetworkAddress(12345);
  ZigBeeEndpoint endpoint = new ZigBeeEndpoint(node, 1);
  ZclOnOffCluster cluster = new ZclOnOffCluster(endpoint);
  networkManager.setSerializer(DefaultSerializer.class, DefaultDeserializer.class);
  Mockito.doNothing().when(mockedTransport).sendCommand(mockedApsFrameListener.capture());
  cluster.onCommand();
  assertEquals(12345, mockedApsFrameListener.getValue().getDestinationAddress());
  node.setNetworkAddress(54321);
  cluster.offCommand();
  assertEquals(54321, mockedApsFrameListener.getValue().getDestinationAddress());
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Test
public void testReceive() {
  ZToolPacket data = getPacket("FE 0B 45 B2 00 00 00 01 00 01 2A 2F 00 35 38 F4");
  ZigBeeApsFrame apsFrame = ZdoManagementRouting.create(data);
  assertEquals(0x0000, apsFrame.getSourceAddress());
  assertEquals(0, apsFrame.getProfile());
  assertEquals(0, apsFrame.getDestinationEndpoint());
  assertTrue(Arrays.equals(getPacketData("00 00 01 00 01 2A 2F 00 35 38"), apsFrame.getPayload()));
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
    case "sourceAddress":
      String[] sourceAddress = key[1].split("/");
      apsFrame.setSourceAddress(Integer.parseInt(sourceAddress[0]));
      apsFrame.setSourceEndpoint(Integer.parseInt(sourceAddress[1]));
      break;
    case "destinationAddress":
      String[] destAddress = key[1].split("/");
      apsFrame.setDestinationAddress(Integer.parseInt(destAddress[0]));
      apsFrame.setDestinationEndpoint(Integer.parseInt(destAddress[1]));
      break;
    case "profile":
      apsFrame.setProfile(Integer.parseInt(key[1], 16));
      break;
    case "cluster":
      apsFrame.setCluster(Integer.parseInt(key[1], 16));
      break;
    case "addressMode":
      ZigBeeNwkAddressMode addressMode = ZigBeeNwkAddressMode.valueOf(key[1]);
      apsFrame.setAddressMode(addressMode);
      break;
    case "radius":
      apsFrame.setRadius(Integer.parseInt(key[1]));
      break;
    case "apsSecurity":
      apsFrame.setSecurityEnabled(Boolean.valueOf(key[1]));
      break;
    case "apsCounter":

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

private ZigBeeCommand receiveZclCommand(final ZclFieldDeserializer fieldDeserializer,
    final ZigBeeApsFrame apsFrame) {
  // Process the ZCL header
  ZclHeader zclHeader = new ZclHeader(fieldDeserializer);
  logger.debug("RX ZCL: {}", zclHeader);
  // Get the command type
  ZclCommandType commandType = null;
  if (zclHeader.getFrameType() == ZclFrameType.ENTIRE_PROFILE_COMMAND) {
    commandType = ZclCommandType.getGeneric(zclHeader.getCommandId());
  } else {
    commandType = ZclCommandType.getCommandType(apsFrame.getCluster(), zclHeader.getCommandId(),
        zclHeader.getDirection());
  }
  if (commandType == null) {
    logger.debug("No command type found for {}, cluster={}, command={}, direction={}", zclHeader.getFrameType(),
        apsFrame.getCluster(), zclHeader.getCommandId(), zclHeader.getDirection());
    return null;
  }
  ZclCommand command = commandType.instantiateCommand();
  if (command == null) {
    logger.debug("No command found for {}, cluster={}, command={}", zclHeader.getFrameType(),
        apsFrame.getCluster(), zclHeader.getCommandId());
    return null;
  }
  command.setCommandDirection(zclHeader.getDirection());
  command.deserialize(fieldDeserializer);
  command.setClusterId(apsFrame.getCluster());
  command.setTransactionId(zclHeader.getSequenceNumber());
  return command;
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

public static ZigBeeApsFrame create(ZToolPacket packet) {
    ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
    apsFrame.setCluster(ZdoCommandType.MANAGEMENT_ROUTING_RESPONSE.getClusterId());
    apsFrame.setDestinationEndpoint(0);
    apsFrame.setSourceAddress(packet.getPacket()[4] + (packet.getPacket()[5] << 8));
    apsFrame.setSourceEndpoint(0);
    apsFrame.setProfile(0);
    apsFrame.setPayload(Arrays.copyOfRange(packet.getPacket(), 5, packet.getPacket().length - 1));

    return apsFrame;
  }
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Test
public void testReceive() {
  ZToolPacket data = getPacket("FE 03 45 B4 E6 D2 00 C6");
  ZigBeeApsFrame apsFrame = ZdoManagementLeave.create(data);
  assertEquals(53990, apsFrame.getSourceAddress());
  assertEquals(0, apsFrame.getProfile());
  assertEquals(0, apsFrame.getDestinationEndpoint());
  assertTrue(Arrays.equals(getPacketData("D2 00"), apsFrame.getPayload()));
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

public static ZigBeeApsFrame create(ZToolPacket packet) {
    ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
    apsFrame.setCluster(ZdoCommandType.MANAGEMENT_LEAVE_RESPONSE.getClusterId());
    apsFrame.setDestinationEndpoint(0);
    apsFrame.setSourceAddress(packet.getPacket()[4] + (packet.getPacket()[5] << 8));
    apsFrame.setSourceEndpoint(0);
    apsFrame.setProfile(0);
    apsFrame.setPayload(Arrays.copyOfRange(packet.getPacket(), 5, packet.getPacket().length - 1));

    return apsFrame;
  }
}

内容来源于网络，如有侵权，请联系作者删除！

ZigBeeApsFrame

相关文章

    查看更多

    热门标签

    更多
    JavaquerypythonNode开发语言requestUtil数据库Table后端算法LoggerMessageElementParser

    最新文章

    更多
    • 蜀ICP备13028337号-1 大数据知识库 https://www.saoniuhuo.com © All rights reserved
    • 本站内容来源互联网,如果侵犯您的权益请联系我们删除, 联系方式：448109455@qq.com