com.zsmartsystems.zigbee.ZigBeeApsFrame.setSourceEndpoint()方法的使用及代码示例

x33g5p2x  于2022-02-05 转载在 其他  
字(8.1k)|赞(0)|评价(0)|浏览(124)

本文整理了Java中com.zsmartsystems.zigbee.ZigBeeApsFrame.setSourceEndpoint()方法的一些代码示例，展示了ZigBeeApsFrame.setSourceEndpoint()的具体用法。这些代码示例主要来源于Github/Stackoverflow/Maven等平台，是从一些精选项目中提取出来的代码，具有较强的参考意义，能在一定程度帮忙到你。ZigBeeApsFrame.setSourceEndpoint()方法的具体详情如下：
包路径：com.zsmartsystems.zigbee.ZigBeeApsFrame
类名称：ZigBeeApsFrame
方法名：setSourceEndpoint

ZigBeeApsFrame.setSourceEndpoint介绍

暂无

代码示例

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

public static ZigBeeApsFrame create(ZToolPacket packet) {
    ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
    apsFrame.setCluster(ZdoCommandType.ACTIVE_ENDPOINTS_RESPONSE.getClusterId());
    apsFrame.setDestinationEndpoint(0);
    apsFrame.setSourceAddress(packet.getPacket()[4] + (packet.getPacket()[5] << 8));
    apsFrame.setSourceEndpoint(0);
    apsFrame.setProfile(0);
    apsFrame.setPayload(Arrays.copyOfRange(packet.getPacket(), 5, packet.getPacket().length - 1));

    return apsFrame;
  }
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

public static ZigBeeApsFrame create(ZToolPacket packet) {
    ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
    apsFrame.setCluster(ZdoCommandType.MANAGEMENT_ROUTING_RESPONSE.getClusterId());
    apsFrame.setDestinationEndpoint(0);
    apsFrame.setSourceAddress(packet.getPacket()[4] + (packet.getPacket()[5] << 8));
    apsFrame.setSourceEndpoint(0);
    apsFrame.setProfile(0);
    apsFrame.setPayload(Arrays.copyOfRange(packet.getPacket(), 5, packet.getPacket().length - 1));

    return apsFrame;
  }
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

public static ZigBeeApsFrame create(ZToolPacket packet) {
  ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
  apsFrame.setCluster(ZdoCommandType.DEVICE_ANNOUNCE.getClusterId());
  apsFrame.setDestinationEndpoint(0);
  apsFrame.setSourceAddress(packet.getPacket()[4] + (packet.getPacket()[5] << 8));
  apsFrame.setSourceEndpoint(0);
  apsFrame.setProfile(0);
  apsFrame.setPayload(Arrays.copyOfRange(packet.getPacket(), 5, packet.getPacket().length - 1));
  return apsFrame;
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

public static ZigBeeApsFrame create(ZToolPacket packet) {
    ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
    apsFrame.setCluster(ZdoCommandType.POWER_DESCRIPTOR_RESPONSE.getClusterId());
    apsFrame.setDestinationEndpoint(0);
    apsFrame.setSourceAddress(packet.getPacket()[4] + (packet.getPacket()[5] << 8));
    apsFrame.setSourceEndpoint(0);
    apsFrame.setProfile(0);
    apsFrame.setPayload(Arrays.copyOfRange(packet.getPacket(), 5, packet.getPacket().length - 1));

    return apsFrame;
  }
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

public static ZigBeeApsFrame create(ZToolPacket packet) {
    ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
    apsFrame.setCluster(ZdoCommandType.NODE_DESCRIPTOR_RESPONSE.getClusterId());
    apsFrame.setDestinationEndpoint(0);
    apsFrame.setSourceAddress(packet.getPacket()[4] + (packet.getPacket()[5] << 8));
    apsFrame.setSourceEndpoint(0);
    apsFrame.setProfile(0);
    apsFrame.setPayload(Arrays.copyOfRange(packet.getPacket(), 5, packet.getPacket().length - 1));

    return apsFrame;
  }
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

public static ZigBeeApsFrame create(ZToolPacket packet) {
    ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
    apsFrame.setCluster(ZdoCommandType.SIMPLE_DESCRIPTOR_RESPONSE.getClusterId());
    apsFrame.setDestinationEndpoint(0);
    apsFrame.setSourceAddress(packet.getPacket()[4] + (packet.getPacket()[5] << 8));
    apsFrame.setSourceEndpoint(0);
    apsFrame.setProfile(0);
    apsFrame.setPayload(Arrays.copyOfRange(packet.getPacket(), 5, packet.getPacket().length - 1));

    return apsFrame;
  }
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

public static ZigBeeApsFrame create(ZToolPacket packet) {
    ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
    apsFrame.setCluster(ZdoCommandType.MANAGEMENT_LQI_RESPONSE.getClusterId());
    apsFrame.setDestinationEndpoint(0);
    apsFrame.setSourceAddress(packet.getPacket()[4] + (packet.getPacket()[5] << 8));
    apsFrame.setSourceEndpoint(0);
    apsFrame.setProfile(0);
    apsFrame.setPayload(Arrays.copyOfRange(packet.getPacket(), 5, packet.getPacket().length - 1));

    return apsFrame;
  }
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

public static ZigBeeApsFrame create(ZToolPacket packet) {
    ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
    apsFrame.setCluster(ZdoCommandType.MANAGEMENT_LEAVE_RESPONSE.getClusterId());
    apsFrame.setDestinationEndpoint(0);
    apsFrame.setSourceAddress(packet.getPacket()[4] + (packet.getPacket()[5] << 8));
    apsFrame.setSourceEndpoint(0);
    apsFrame.setProfile(0);
    apsFrame.setPayload(Arrays.copyOfRange(packet.getPacket(), 5, packet.getPacket().length - 1));

    return apsFrame;
  }
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

public static ZigBeeApsFrame create(ZToolPacket packet) {
    ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
    apsFrame.setCluster(ZdoCommandType.IEEE_ADDRESS_RESPONSE.getClusterId());
    apsFrame.setDestinationEndpoint(0);
    apsFrame.setSourceAddress(packet.getPacket()[13] + (packet.getPacket()[14] << 8));
    apsFrame.setSourceEndpoint(0);
    apsFrame.setProfile(0);
    int temp[] = Arrays.copyOfRange(packet.getPacket(), 3, packet.getPacket().length - 1);
    int a = temp[12];
    temp[12] = temp[13];
    temp[13] = a;
    temp[0] = 0;
    apsFrame.setPayload(temp);

    return apsFrame;
  }
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

String[] sourceAddress = key[1].split("/");
  apsFrame.setSourceAddress(Integer.parseInt(sourceAddress[0]));
  apsFrame.setSourceEndpoint(Integer.parseInt(sourceAddress[1]));
  break;
case "destinationAddress":

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

public static ZigBeeApsFrame create(ZToolPacket packet) {
    ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
    apsFrame.setCluster(packet.getPacket()[7] + (packet.getPacket()[8] << 8));
    apsFrame.setDestinationAddress(packet.getPacket()[11] + (packet.getPacket()[12] << 8));
    apsFrame.setDestinationEndpoint(0);
    apsFrame.setSourceAddress(packet.getPacket()[4] + (packet.getPacket()[5] << 8));
    apsFrame.setSourceEndpoint(0);
    apsFrame.setProfile(0);
    apsFrame.setApsCounter(packet.getPacket()[10]);
    apsFrame.setPayload(Arrays.copyOfRange(packet.getPacket(), 12, packet.getPacket().length - 1));

    return apsFrame;
  }
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

apsFrame.setSourceEndpoint(0);
apsFrame.setDestinationEndpoint(0);
command.serialize(fieldSerializer);
apsFrame.setSourceEndpoint(1);

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Override
public boolean notify(final AF_INCOMING_MSG clusterMessage) {
  ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
  apsFrame.setCluster(clusterMessage.getClusterId());
  apsFrame.setDestinationEndpoint(clusterMessage.getDstEndpoint());
  apsFrame.setSourceEndpoint(clusterMessage.getSrcEndpoint());
  apsFrame.setProfile(getEndpointProfile(clusterMessage.getDstEndpoint()));
  // nwkHeader.setDestinationAddress(clusterMessage.geta);
  apsFrame.setSourceAddress(clusterMessage.getSrcAddr());
  apsFrame.setApsCounter(clusterMessage.getTransId());
  apsFrame.setPayload(clusterMessage.getData());
  zigbeeNetworkReceive.receiveCommand(apsFrame);
  return true;
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

apsFrame.setDestinationEndpoint(receivedData.getDestinationEndpoint());
apsFrame.setProfile(receivedData.getProfileId());
apsFrame.setSourceEndpoint(receivedData.getSourceEndpoint());

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Test
public void testReceiveZclCommand() {
  ZigBeeNetworkManager networkManager = mockZigBeeNetworkManager();
  networkManager.setSerializer(DefaultSerializer.class, DefaultDeserializer.class);
  ZigBeeApsFrame apsFrame = new ZigBeeApsFrame();
  apsFrame.setSourceAddress(1234);
  apsFrame.setDestinationAddress(0);
  apsFrame.setApsCounter(1);
  apsFrame.setCluster(6);
  apsFrame.setDestinationEndpoint(2);
  apsFrame.setProfile(0x104);
  apsFrame.setSourceEndpoint(5);
  ZclHeader zclHeader = new ZclHeader();
  zclHeader.setCommandId(0);
  zclHeader.setFrameType(ZclFrameType.ENTIRE_PROFILE_COMMAND);
  zclHeader.setSequenceNumber(1);
  DefaultSerializer serializer = new DefaultSerializer();
  ZclFieldSerializer fieldSerializer = new ZclFieldSerializer(serializer);
  apsFrame.setPayload(zclHeader.serialize(fieldSerializer, new int[] {}));
  networkManager.receiveCommand(apsFrame);
  Awaitility.await().until(() -> commandListenerUpdated());
  ReadAttributesCommand response = (ReadAttributesCommand) commandListenerCapture.get(0);
  assertEquals(6, (int) response.getClusterId());
  assertEquals(0, (int) response.getCommandId());
  assertEquals(1, (int) response.getTransactionId());
  assertEquals(new ZigBeeEndpointAddress(1234, 5), response.getSourceAddress());
}

内容来源于网络，如有侵权，请联系作者删除！

ZigBeeApsFrame

相关文章

    查看更多

    热门标签

    更多
    JavaquerypythonNode开发语言requestUtil数据库Table后端算法LoggerMessageElementParser

    最新文章

    更多
    • 蜀ICP备13028337号-1 大数据知识库 https://www.saoniuhuo.com © All rights reserved
    • 本站内容来源互联网,如果侵犯您的权益请联系我们删除, 联系方式：448109455@qq.com