com.zsmartsystems.zigbee.zcl.ZclAttribute.getCluster()方法的使用及代码示例

x33g5p2x  于2022-02-05 转载在 其他  
字(11.0k)|赞(0)|评价(0)|浏览(100)

本文整理了Java中com.zsmartsystems.zigbee.zcl.ZclAttribute.getCluster()方法的一些代码示例，展示了ZclAttribute.getCluster()的具体用法。这些代码示例主要来源于Github/Stackoverflow/Maven等平台，是从一些精选项目中提取出来的代码，具有较强的参考意义，能在一定程度帮忙到你。ZclAttribute.getCluster()方法的具体详情如下：
包路径：com.zsmartsystems.zigbee.zcl.ZclAttribute
类名称：ZclAttribute
方法名：getCluster

ZclAttribute.getCluster介绍

[英]Gets the ZclClusterType to which this attribute belongs
[中]获取此属性所属的ZclClusterType

代码示例

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
  public void attributeUpdated(ZclAttribute attribute) {
    logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
    if (attribute.getCluster() == ZclClusterType.RELATIVE_HUMIDITY_MEASUREMENT
        && attribute.getId() == ZclRelativeHumidityMeasurementCluster.ATTR_MEASUREDVALUE) {
      Integer value = (Integer) attribute.getLastValue();
      if (value != null) {
        updateChannelState(new DecimalType(BigDecimal.valueOf(value, 2)));
      }
    }
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
  public void attributeUpdated(ZclAttribute attribute) {
    logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
    if (attribute.getCluster() == ZclClusterType.ILLUMINANCE_MEASUREMENT
        && attribute.getId() == ZclIlluminanceMeasurementCluster.ATTR_MEASUREDVALUE) {
      Integer value = (Integer) attribute.getLastValue();
      if (value != null) {
        updateChannelState(new DecimalType(BigDecimal.valueOf(value, 2)));
      }
    }
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
  public void attributeUpdated(ZclAttribute attribute) {
    logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
    if (attribute.getCluster() == ZclClusterType.ELECTRICAL_MEASUREMENT
        && attribute.getId() == ZclElectricalMeasurementCluster.ATTR_RMSVOLTAGE) {
      Integer value = (Integer) attribute.getLastValue();
      if (value != null) {
        BigDecimal valueInVolts = BigDecimal.valueOf(value * multiplier / divisor);
        updateChannelState(new QuantityType<ElectricPotential>(valueInVolts, SmartHomeUnits.VOLT));
      }
    }
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
public void attributeUpdated(ZclAttribute attribute) {
  logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
  if (attribute.getCluster() == ZclClusterType.IAS_ZONE
      && attribute.getId() == ZclIasZoneCluster.ATTR_ZONESTATUS) {
    updateChannelState((Integer) attribute.getLastValue());
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
  public void attributeUpdated(ZclAttribute attribute) {
    logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
    if (attribute.getCluster() == ZclClusterType.TEMPERATURE_MEASUREMENT
        && attribute.getId() == ZclTemperatureMeasurementCluster.ATTR_MEASUREDVALUE) {
      Integer value = (Integer) attribute.getLastValue();
      if (value != null) {
        updateChannelState(new QuantityType<>(BigDecimal.valueOf(value, 2), SIUnits.CELSIUS));
      }
    }
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
  public void attributeUpdated(ZclAttribute attribute) {
    logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
    if (attribute.getCluster() == ZclClusterType.ELECTRICAL_MEASUREMENT
        && attribute.getId() == ZclElectricalMeasurementCluster.ATTR_RMSCURRENT) {
      Integer value = (Integer) attribute.getLastValue();
      if (value != null) {
        BigDecimal valueInAmpere = BigDecimal.valueOf(value * multiplier / divisor);
        updateChannelState(new QuantityType<ElectricCurrent>(valueInAmpere, SmartHomeUnits.AMPERE));
      }
    }
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
  public void attributeUpdated(ZclAttribute attribute) {
    logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
    if (attribute.getCluster() == ZclClusterType.ELECTRICAL_MEASUREMENT
        && attribute.getId() == ZclElectricalMeasurementCluster.ATTR_ACTIVEPOWER) {
      Integer value = (Integer) attribute.getLastValue();
      if (value != null) {
        BigDecimal valueInWatt = BigDecimal.valueOf(value * multiplier / divisor);
        updateChannelState(new QuantityType<Power>(valueInWatt, SmartHomeUnits.WATT));
      }
    }
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
  public synchronized void attributeUpdated(ZclAttribute attribute) {
    logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
    if (attribute.getCluster() == ZclClusterType.LEVEL_CONTROL
        && attribute.getId() == ZclLevelControlCluster.ATTR_CURRENTLEVEL) {
      lastLevel = levelToPercent((Integer) attribute.getLastValue());
      if (currentOnOffState.get()) {
        // Note that state is only updated if the current On/Off state is TRUE (ie ON)
        updateChannelState(lastLevel);
      }
    } else if (attribute.getCluster() == ZclClusterType.ON_OFF && attribute.getId() == ZclOnOffCluster.ATTR_ONOFF) {
      if (attribute.getLastValue() != null) {
        currentOnOffState.set((Boolean) attribute.getLastValue());
        updateChannelState(currentOnOffState.get() ? lastLevel : OnOffType.OFF);
      }
    }
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
  public void attributeUpdated(ZclAttribute attribute) {
    logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
    if (attribute.getCluster() == ZclClusterType.POWER_CONFIGURATION
        && attribute.getId() == ZclPowerConfigurationCluster.ATTR_BATTERYVOLTAGE) {
      Integer value = (Integer) attribute.getLastValue();
      if (value == null || value == 0xFF) {
        // The value 0xFF indicates an invalid or unknown reading.
        return;
      }
      BigDecimal valueInVolt = BigDecimal.valueOf(value, 1);
      updateChannelState(new QuantityType<ElectricPotential>(valueInVolt, SmartHomeUnits.VOLT));
    }
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
public void attributeUpdated(ZclAttribute attribute) {
  logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
  if (attribute.getCluster() == ZclClusterType.ON_OFF && attribute.getId() == ZclOnOffCluster.ATTR_ONOFF) {
    Boolean value = (Boolean) attribute.getLastValue();
    if (value != null && value) {
      updateChannelState(OnOffType.ON);
    } else {
      updateChannelState(OnOffType.OFF);
    }
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
  public void attributeUpdated(ZclAttribute attribute) {
    logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
    if (attribute.getCluster() == ZclClusterType.POWER_CONFIGURATION
        && attribute.getId() == ZclPowerConfigurationCluster.ATTR_BATTERYPERCENTAGEREMAINING) {
      Integer value = (Integer) attribute.getLastValue();
      if (value == null) {
        return;
      }

      updateChannelState(new DecimalType(value / 2));
    }
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
  public void attributeUpdated(ZclAttribute attribute) {
    logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
    if (attribute.getCluster() == ZclClusterType.OCCUPANCY_SENSING
        && attribute.getId() == ZclOccupancySensingCluster.ATTR_OCCUPANCY) {
      Integer value = (Integer) attribute.getLastValue();
      if (value != null && value == 1) {
        updateChannelState(OnOffType.ON);
      } else {
        updateChannelState(OnOffType.OFF);
      }
    }
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
  public void attributeUpdated(ZclAttribute attribute) {
    logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
    if (attribute.getCluster() == ZclClusterType.DOOR_LOCK
        && attribute.getId() == ZclDoorLockCluster.ATTR_LOCKSTATE) {
      Integer value = (Integer) attribute.getLastValue();
      if (value != null && value == 1) {
        updateChannelState(OnOffType.ON);
      } else {
        updateChannelState(OnOffType.OFF);
      }
    }
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
public void attributeUpdated(ZclAttribute attribute) {
  logger.debug("{}: ZigBee attribute reports {}  on endpoint {}", endpoint.getIeeeAddress(), attribute,
      endpoint.getEndpointId());
  if (attribute.getCluster() == ZclClusterType.COLOR_CONTROL
      && attribute.getId() == ZclColorControlCluster.ATTR_COLORTEMPERATURE) {
    if (lastColorMode == null || lastColorMode == ColorModeEnum.COLORTEMPERATURE) {
      Integer temperatureInMired = (Integer) attribute.getLastValue();
      PercentType percent = miredToPercent(temperatureInMired);
      if (percent != null) {
        updateChannelState(percent);
      }
    }
  } else if (attribute.getCluster() == ZclClusterType.COLOR_CONTROL
      && attribute.getId() == ZclColorControlCluster.ATTR_COLORMODE) {
    Integer colorMode = (Integer) attribute.getLastValue();
    lastColorMode = ColorModeEnum.getByValue(colorMode);
    if (lastColorMode != ColorModeEnum.COLORTEMPERATURE) {
      updateChannelState(UnDefType.UNDEF);
    }
  }
}

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
public synchronized void attributeUpdated(ZclAttribute attribute) {
  logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);
  if (attribute.getCluster() != ZclClusterType.PRESSURE_MEASUREMENT) {
    return;

代码示例来源：origin: openhab/org.openhab.binding.zigbee

if (attribute.getCluster().getId() == ZclOnOffCluster.CLUSTER_ID) {
  if (attribute.getId() == ZclOnOffCluster.ATTR_ONOFF) {
    Boolean value = (Boolean) attribute.getLastValue();
    updateOnOff(onoff);
} else if (attribute.getCluster().getId() == ZclLevelControlCluster.CLUSTER_ID) {
  if (attribute.getId() == ZclLevelControlCluster.ATTR_CURRENTLEVEL) {
    PercentType brightness = levelToPercent((Integer) attribute.getLastValue());
    updateBrightness(brightness);
} else if (attribute.getCluster().getId() == ZclColorControlCluster.CLUSTER_ID) {
  if (attribute.getId() == ZclColorControlCluster.ATTR_CURRENTHUE) {
    Integer value = (Integer) attribute.getLastValue();

代码示例来源：origin: openhab/org.openhab.binding.zigbee

@Override
  public void attributeUpdated(ZclAttribute attribute) {
    if (attribute.getCluster() == ZclClusterType.POWER_CONFIGURATION
        && attribute.getId() == ZclPowerConfigurationCluster.ATTR_BATTERYALARMSTATE) {

      logger.debug("{}: ZigBee attribute reports {}", endpoint.getIeeeAddress(), attribute);

      // The value is a 32-bit bitmap, represented by an Integer
      Integer value = (Integer) attribute.getLastValue();
      if (value == null) {
        return;
      }

      if ((value & MIN_THRESHOLD_BITMASK) != 0) {
        updateChannelState(new StringType(STATE_OPTION_BATTERY_MIN_THRESHOLD));
      } else if ((value & THRESHOLD_1_BITMASK) != 0) {
        updateChannelState(new StringType(STATE_OPTION_BATTERY_THRESHOLD_1));
      } else if ((value & THRESHOLD_2_BITMASK) != 0) {
        updateChannelState(new StringType(STATE_OPTION_BATTERY_THRESHOLD_2));
      } else if ((value & THRESHOLD_3_BITMASK) != 0) {
        updateChannelState(new StringType(STATE_OPTION_BATTERY_THRESHOLD_3));
      } else {
        updateChannelState(new StringType(STATE_OPTION_BATTERY_NO_THRESHOLD));
      }
    }
  }
}

代码示例来源：origin: zsmartsystems/com.zsmartsystems.zigbee

@Test
public void testConstructor() {
  ZclAttribute attribute = new ZclAttribute(ZclClusterType.ON_OFF, 0, "Test Name",
      ZclDataType.UNSIGNED_8_BIT_INTEGER, false, false, false, false);
  assertEquals(ZclClusterType.ON_OFF, attribute.getCluster());
  assertEquals(0, attribute.getId());
  assertEquals("Test Name", attribute.getName());
  assertEquals(ZclDataType.UNSIGNED_8_BIT_INTEGER, attribute.getDataType());
  assertEquals(false, attribute.isMandatory());
  assertEquals(false, attribute.isWritable());
  assertEquals(false, attribute.isReadable());
  assertEquals(false, attribute.isReportable());
  System.out.println(attribute.toString());
  attribute = new ZclAttribute(ZclClusterType.ON_OFF, 0, "Test Name", ZclDataType.UNSIGNED_8_BIT_INTEGER, true,
      true, true, true);
  assertEquals(true, attribute.isMandatory());
  assertEquals(true, attribute.isWritable());
  assertEquals(true, attribute.isReadable());
  assertEquals(true, attribute.isReportable());
  System.out.println(attribute.toString());
}

内容来源于网络，如有侵权，请联系作者删除！

ZclAttribute

相关文章

    查看更多

    热门标签

    更多
    JavaquerypythonNode开发语言requestUtil数据库Table后端算法LoggerMessageElementParser

    最新文章

    更多
    • 蜀ICP备13028337号-1 大数据知识库 https://www.saoniuhuo.com © All rights reserved
    • 本站内容来源互联网,如果侵犯您的权益请联系我们删除, 联系方式：448109455@qq.com